- 39%

ATT TV Now Remote DirecTV Stream Remote Control 2nd Generation Voice Recognition RC82V Compatible for C71KW-200 and C71KW-400 Osprey Receiver – Requires Compatible Receiver

The RC82V / R35602 remote control works with AT&T TV Now Osprey C71KW-200 and C71KW-400 as well as the DIRECTV Stream Box. The RC82V remote can be programmed to operate some features on TVs or audio/video equipment. FEATURES 1. The RC82V Remote Control works in IR and RF mode. 2. Basic remote operations can be performed in the IR mode. 3. The remote uses two-way communication to the AT&T TV. 4. RF mode eliminates the need for the remote and the paired devices to be in line of sight to each other. 5. The RC82V Remote Control has a directional pad. Basic operations and functions can be made by pressing the direction, then pressing ok. 6. Once paired, voice recognition is also available with the RC82V Remote Control so you can use voice search. PAIRING YOUR REMOTE TO THE SET TOP BOX To pair the DIRECTV remote control to the STB, perform the following steps: 1. Press and hold REWIND and FAST FORWARD at the same time for 3 seconds until the visible LED’s start flashing. 2. Enter digits 961 followed by CH UP key. 3. Using the number keys enter the last six digits of the RID number located behind the STB. 4. Press and release ENTER key (the green light flashes twice). CLEARING PAIRING 1. Press and hold DASH and ENTER at the same time for 3 seconds until the LED’s flash. The RCU will unpair from the STB. RESTORING FACTORY DEFAULT SETTINGS To reset all the functions of the remote control to the factory default settings follow these steps: 1. Press and hold MUTE and EXIT at the same time until the RED LED turns ON. 2. Using the number keys, enter 9‐8‐1. (The feedback flashes 4 times). PACKAGE INCLUDES1x AT&T/DirecTV Remote
✅ ORIGINAL REPLACEMENT – Replace your broken AT&T TV Now Remote or DirecTV Stream Remote with this original replacement
✅ VOICE RECOGNITION – Once paired, voice recognition is also available with the RC82V Remote Control so you can use voice search.
✅ DIRECTIONAL PAD – The RC82V Remote Control has a directional pad. Basic operations and functions can be made by pressing the direction, then pressing ok.
✅ TWO-WAY COMMUNICATION – The remote uses two-way communication to the AT&T TV to send feedback back and forth.
✅ INFRARED MODE – Basic remote operations can be performed in the Infrared Mode while others can be done in RF Mode
✅ RADIO FREQUENCY MODE – RF Mode eliminates the need for the remote and the paired devices to be in line of sight to each other.
⚠️ Compatible receiver is required but NOT included ⚠️

Original price was: $23.99.Current price is: $14.71.

Added to wishlistRemoved from wishlist 0


Price: $23.99 - $14.71
(as of May 15, 2024 13:14:21 UTC – Details)



The RC82V / R35602 remote control works with AT&T TV Now Osprey C71KW-200 and C71KW-400 as well as the DIRECTV Stream Box. The RC82V remote can be programmed to operate some features on TVs or audio/video equipment. FEATURES 1. The RC82V Remote Control works in IR and RF mode. 2. Basic remote operations can be performed in the IR mode. 3. The remote uses two-way communication to the AT&T TV. 4. RF mode eliminates the need for the remote and the paired devices to be in line of sight to each other. 5. The RC82V Remote Control has a directional pad. Basic operations and functions can be made by pressing the direction, then pressing ok. 6. Once paired, voice recognition is also available with the RC82V Remote Control so you can use voice search. PAIRING YOUR REMOTE TO THE SET TOP BOX To pair the DIRECTV remote control to the STB, perform the following steps: 1. Press and hold REWIND and FAST FORWARD at the same time for 3 seconds until the visible LED’s start flashing. 2. Enter digits 961 followed by CH UP key. 3. Using the number keys enter the last six digits of the RID number located behind the STB. 4. Press and release ENTER key (the green light flashes twice). CLEARING PAIRING 1. Press and hold DASH and ENTER at the same time for 3 seconds until the LED’s flash. The RCU will unpair from the STB. RESTORING FACTORY DEFAULT SETTINGS To reset all the functions of the remote control to the factory default settings follow these steps: 1. Press and hold MUTE and EXIT at the same time until the RED LED turns ON. 2. Using the number keys, enter 9‐8‐1. (The feedback flashes 4 times). PACKAGE INCLUDES1x AT&T/DirecTV Remote
✅ ORIGINAL REPLACEMENT – Replace your broken AT&T TV Now Remote or DirecTV Stream Remote with this original replacement
✅ VOICE RECOGNITION – Once paired, voice recognition is also available with the RC82V Remote Control so you can use voice search.
✅ DIRECTIONAL PAD – The RC82V Remote Control has a directional pad. Basic operations and functions can be made by pressing the direction, then pressing ok.
✅ TWO-WAY COMMUNICATION – The remote uses two-way communication to the AT&T TV to send feedback back and forth.
✅ INFRARED MODE – Basic remote operations can be performed in the Infrared Mode while others can be done in RF Mode
✅ RADIO FREQUENCY MODE – RF Mode eliminates the need for the remote and the paired devices to be in line of sight to each other.
⚠️ Compatible receiver is required but NOT included ⚠️

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “ATT TV Now Remote DirecTV Stream Remote Control 2nd Generation Voice Recognition RC82V Compatible for C71KW-200 and C71KW-400 Osprey Receiver – Requires Compatible Receiver”

Your email address will not be published. Required fields are marked *

ATT TV Now Remote DirecTV Stream Remote Control 2nd Generation Voice Recognition RC82V Compatible for C71KW-200 and C71KW-400 Osprey Receiver – Requires Compatible Receiver
ATT TV Now Remote DirecTV Stream Remote Control 2nd Generation Voice Recognition RC82V Compatible for C71KW-200 and C71KW-400 Osprey Receiver – Requires Compatible Receiver

Original price was: $23.99.Current price is: $14.71.

LoveTechBrands
Logo
Shopping cart